Best Ways to Vinyl-Ready Vector Cut Skin Templates

Best Ways to Vinyl-Ready Vector Cut Skin Templates

Vinyl templates are an excellent method to launch the business of graphic design. It is not necessary to utilize costly software like Photoshop when you wish to design templates on vinyl to sell. This tutorial will show you how to make vectors that can be used to create vinyl-ready vector cut skin templates. So, let’s get started!

The Importance of Vinyl Cut Skin Templates

Skin templates from vinyl can be a fantastic option to begin the business of graphic design without the cost of purchasing costly software. You don’t need expensive programs like Photoshop when you wish to design templates using vinyl available for purchase. This article will help you learn how to make vectors that can be used to cut vinyl skin templates. So let’s start!

Making a template for vinyl is relatively simple and easy. First, you’ll need is a vector application that supports SVG files, such as Illustrator, Inkscape, or CorelDraw which can support SVG files. After that, you need to open the .svg file within the program and proceed by following the steps listed below.

What you need for Vinyl cut skin templates

It is possible to begin the vector-based design process using a pencil and a piece of paper. However, to ensure that your templates appear professional, you’ll require an application that can draw vectors. The software can help you make the ideal pattern to cut your vinyl skin templates. If you’re not certain what software you should use I would suggest Adobe Illustrator.

After you’ve got your vector application set up then open it and open a new file. Select the Pencil tool on the toolbar. Draw the basic design. The shape or size is most suitable to the task you’re working on.

After you’ve drawn the outline, click ” Ctrl + Alt + or” to switch into editing mode, if needed. Choose the Shape Builder tool on the toolbar, and select Create a Closed Shape among the choices available. Then, click on every corner of the shape and close the shape and make sure that the shape is perfectly circular shape (if required).

It is essential that all of your shapes are closed off as it will help allow you to save time as we draw our vectors over these shapes. Here’s how my design looked when I closed it off

It’s here’s how it looks when it’s been shut off:

Select the open path tool on the toolbar (I utilized the pencil) then draw an extended line using the mouse the area you would like one line to end.

…and press ” Ctrl+Alt+ /

Materials to Vinyl Cut Skin Templates

Tracing papers are employed to draw the cut vinyl skin template.

Template for cutting the skin with vinyl These templates are made for use on cutting machines and can be purchased on the internet or at numerous Office supplies stores.

Paper piece

The size should be sufficient to support your logo to it.


It is necessary to draw on the paper to trace.


The option is not mandatory, but you’ll want to do it to ensure your designs will be properly scaled and not distorted when you transform it into vectors.


They’re required if are planning to cut your template cut from the traced vinyl out of the larger sheet of paper used for tracing.

Selecting the Best Types of Fonts Vinyl Cutting Skin Templates

The first step is select the font that you’d like to use on your skin template cut from vinyl. There are several styles that work for this sort of project:

  • Arial
  • Century Gothic
  • Comic Sans MS
  • Impact
  • Modern Sans Serif
  • Myriad Pro

There are a variety of choices you could consider. It is important to keep the fact in mind that your website needs a particular font, or is one that is customizable by the user’s preference of font. It could range that is customizable, from a text message, or changing your overall appearance of your site.

How to create an Illustrator Vector Layer within Illustrator

In the beginning, you’ll have download the application known as Illustrator. When you launch the application and begin creating a new file then you’ll need to select an “template.” Pick “New Document” from the Template.” The program gives you the blank canvas you can start with. Click in the “Layers” section to the left of the screen. There should be two layers: Background as well as Contents.

Designing Your Own Custom Book Cover Template

The initial step in making your personal album cover is to design an album cover folder. Within that folder, you should create an appropriate subfolder to accommodate each element of the layout. In the case of, for example, if you’re creating an album cover template that has both a back and front then you need to create an “front” folder, as well as an “back” folder.

After that you will need to open the front folder inside Illustrator and then create the following items:

  • An object that is vector (usually called the shape) to be used to create backgrounds
  • An object in vector format that will be used as the album’s cover image
  • A few words that can serve as the album’s title or name.
  • The following text will act as your artist’s title
  • Vector objects that will be utilized to create your headphone

Next step is to duplicate the process for back folders. Once you’ve created the three objects, launch Adobe Illustrator’s effects panel. Then switch in to Live Paint Mode. This mode lets it is possible to draw over of the work you’ve drawn using Photoshop and not have to fret about damaging any layers.

It is also a place where you could add texturing or color (a painting brush) If you want to. The next step is to export the shapes, so they’re ready to print!

For this, take these steps:

  1. Double-click any form and choose Object from the dropdown menu.
  2. Press Shift repeatedly until the desired shapes have been picked;
  3. Select the File tab, Export and Out.

Designing Your Own Customized T-Shirt Template

First thing to accomplish is locate an image that you would like to utilize. This could be any image or even a photo that you have taken yourself.

After you’ve got an picture you want to use, make note of its dimensions. Check that the template is of the proper dimension for the image.

Then, you can open the image within a program for editing graphics like Illustrator as well as Photoshop. Verify you have the correct proportions and that the image is aligned with symmetry with the x and y the axes.

It’s now time to begin working in creating your artwork by using the image. Your artwork should serve as a guide for the areas where cutting blades of the vinyl printer will be for your artwork when applied on t-shirts and other items constructed from vinyl.

Begin by drawing four lines of 45 degrees along both sides of your photograph (see the next section below). These lines must be drawn parallel to the central line of the photo (see further below).

Then, draw four lines in parallel with these four lines, but crossing the lines at an intersection point between the two sets (see further below). The point at which the intersection points will form the shape of a square with one corner pointed upwards while the other corner is pointing downwards (see the diagram below).

Then, draw more lines that are perpendicular to the center line, similar to the method you used to draw those four lines earlier (see the next section below). If you examine the drawing closely it should appear that there are sixteen lines in all by vectors each divided by 45° one (see further below).

How do you use the Illustrator Object to shape tool

The Object-to-Shape Tool lets you create a shape, and then it will then create an object with you.

To open the tool, click Edit > Objects and shape.

To use the tool, start by drawing a shape in your document or from the keyboard shortcut Ctrl+Alt+N/Ctrl+Option+N (depending on your operating system).

Then, select the new form that was designed.

After you’ve clicked it, the frame will be colored around the shape. You are able to change the shade of the frame you want by clicking the small circle that is in the middle of the frame. You can change it by using Arrow keys in your keyboard.

Now that you’ve got a brand newly created object and you’re ready to go on it again with your mouse in order that Illustrator is able to recognize what kind of object it is. As prior to using an Object to Shape tool, the colored boxes will be created on top of your object to ensure that Illustrator can identify what kind of object it’s.

How To Use the Shape Outliner Tool

For creating vector artwork create vector art, you must utilize the tool for creating shape outliners. It is a tool available within Illustrator and allows users to design shapes, and break them down into smaller pieces. To open the shape Outliner tool, open Window>Outliner, or hold Control+Option+O. Create a new form by simply clicking one of the icons located on the left-hand side of the screen. If you select an outline in your document, you’ll be able to see an arrow that permits users to change the shape. While you’ve got an open Shape Outliner tool open, we’ll make the letter A in scratch.

The first step is to select the anchor point of your outline shape. Click on the location you would like the bottom left corner of your shape to be. Double-click the anchor point, and then enter the location you would like the top left corner of the new form to be. Then, you can choose a second anchor point to create your new outline of your shape by clicking where you would like the bottom-right corner of the new shape to be placed and then clicking twice.

Find both points by locating them by clicking or dragging them using your mouse until they both appear with the color green (notice that this happens in the event that they are close to each another). Once you have located both points, move your mouse to any other spot within the canvas (not only beside one point) and another anchor point will appear instantly at this position (see the three green rings surrounding the area)?

If we find two points, we’ll then enter

How to Insert Text to the design.

For any graphics, the initial stage is to include the text. It is possible to use a font installed on your PC or search for one on the internet. If you’re looking to buy the font through an online retailer you can find a number of sites that sell fonts, such as,, Arskins and When you’ve located the right font for your style, you can you can open it, and then place it inside a new file.

Then, decide how much text you’d like within your design. Then, type it on the document in any font you like for the style and in the colors that work best with the design (you will find the color works best for your design and more on ColorLovers).

2 thoughts on “Best Ways to Vinyl-Ready Vector Cut Skin Templates

  1. I’m extremely impressed along with your writing abilities and also with the layout to your weblog.
    Is that this a paid subject or did you modify it your self?
    Anyway keep up the excellent high quality writing, it
    is rare to see a nice weblog like this one these days..

  2. Admiring the persistence you put into your website and detailed
    information you provide. It’s awesome to come across a blog every
    once in a while that isn’t the same outdated rehashed material.

    Great read! I’ve bookmarked your site and I’m including
    your RSS feeds to my Google account.

Leave a Reply

Your email address will not be published. Required fields are marked *