A Patch Guide That Teaches How To Apply Iron-On Emblems

A Patch Guide That Teaches How To Apply Iron-On Emblems

You should never overlook the power of patches to upgrade your clothes in just a few minutes. Whether you want to jazz up your worn-out jacket or uplift your old dress, patches can be of great help. Now you don’t have to be an expert with threads and needles to place a patch, all thanks to iron-on crests. They are affordable and easy to apply, which makes them the best option to cover any tears and small holes.

If you have an iron-on patch and are wondering how to apply it, then this article will answer all your queries. In this guide, we will cover all the steps you need to follow to apply your iron-on patch like an expert. So read on!

Everything You Need To Know About Iron-On Patches Application

Step 1: Gathering Your Materials:

Before you start, it’s important to gather all the necessary materials. These steps will guide you through the tools and supplies you’ll need, including the iron, the patches, and the fabric.

Step 2: Prepare Your Fabric Before Applying The Patch

Before applying the iron on patches, it is important to check the fabric of the clothing. You need to make sure that there is no dust, hair, or any other thing on the back of the iron patch. After double-checking, select the patch and finalize the placement. Don’t forget that placement is the key to achieving the desired look. Use chalk, pen, or tape to help in measuring the exact point. This is a crucial step because if you apply the patch in the wrong place, removing it won’t be easy.

Step 3: Place A Towel To Avoid Any Damage To Your Clothing

The next step is to place a thin towel on your clothing piece. Using a towel can be beneficial in protecting your patch from direct heat. In short, it works as a barrier between the iron and the patch to avoid any damage. If you don’t have a towel, you can also take parchment paper.

Step 4: Put Your Iron On The Right Temperature 

Now that you have positioned the patch on your clothing, the next essential step is setting the iron appropriately. First, check the patch instructions for any specific temperature provided by the manufacturer. If there are no instructions, check the fabric type of your clothing and the patch. Most new irons have settings according to the fabric, such as cotton or wool. If you have nylon, leather or silk clothing, it is better not to apply iron-on patches to them.

Adjust the iron to the right temperature based on the fabric type. We recommend starting with a lower heat setting and increasing it slowly if needed. It’s better to be cautious and avoid high iron temperatures, as it may damage your favorite clothing item. Once the iron is set, preheat thoroughly before moving on to the next step.

Step 5: Place The Iron On The Patch

You are now all set to apply the iron-on patch to your clothing item. Check the placement and carefully put the heated iron directly on your patch, applying a bit of pressure for a short amount of time. This depends on the type of fabric and adhesive used on the back of the patch, so it is important to go through the instructions that come with the emblem.

For example, Velcro patches are made of thick materials and require heat for a longer amount of time. The heat from the iron will help in melting the glue on the back, causing it to bond with the fabric. After a short time, lift the iron and allow the crest and fabric to cool completely before checking it.

Step 6: Sew The Edges Of Your Emblem

After doing the main part of the process, it is time to recheck your patch. Try to lift the edges to ensure that they are properly attached. If you feel that your patch won’t stick for a long duration, then one tip is to sew the edges. Take a thread that matches your patch design and do a straight stitch on the edges. This step is important to make sure that your patch stays on for a longer period.

Step 7: After Care Of Your Iron-On Patch

After applying the emblem to your clothing, it is also important to do aftercare. For washing, you should try to use cold to lukewarm water. It would be great if you could wash your clothing item by hand; if not, then do a gentle cycle on your washing machine. Keep your clothing inside out when you put them in the machine, and don’t wash regularly. We recommend that you go through the instruction label present on your apparel for better guidance.

When washing your emblem, make sure that you don’t add any harsh detergent or chemicals. Putting your patch in a chemical can cause discoloration, and the sides of your crest can fray.  

How To Apply Iron-On Patches Without An Iron?

Another way to apply your iron-on custom patches for clothes is by using a hair straightener. It might not sound right, but it will work as long as the ironing device is hot enough to melt the adhesive and apply the emblem. To use a straightener, you have to preheat it and put the patch on the exact point. After your hair straightener is hot, hold it over the crest. One problem that is most likely to occur is that straighteners are not wide, and you have to put extra time and effort into moving it around to stick your patch on your clothing. If you like to DIY patches on garments and don’t have an iron, then your hair straightener can be of great help. 

Let’s Conclude This Guide:

Putting iron-on patches is a creative and easy way to customize your clothes and enhance their visual appeal. You have to follow a proper application process which includes choosing the right patch for the fabric, using the correct temperature, and putting your iron on the emblem carefully. By following these simple steps, you can increase the charm of your clothes and uplift your closet with customized clothes. So, after reading this guide, we hope that now you are ready to take your favorite iron-on crest and apply it to your outfits.

2 thoughts on “A Patch Guide That Teaches How To Apply Iron-On Emblems

  1. Greetings, I do think your blog could possibly be having internet
    browser compatibility problems. When I look
    at your blog in Safari, it looks fine but when opening in I.E.,
    it has some overlapping issues. I merely wanted to provide you with
    a quick heads up! Aside from that, fantastic site!

Leave a Reply

Your email address will not be published. Required fields are marked *